MYDU Server - Refiner Issues

[PlasmaFlow]

Hi all.

Just got my DU Server Up and testing it I found that I setup a refiner, connect input and output containers, filled the input with raw ores and start the unit and does not run stating there is no input materials. Any Clues?

 

[tool66]

Look at the settings for the refiner to ensure it's configured to accept the materials in the input container

[Saphyron]

Because you reduced the speed it takes to refine, it requires way more ore for each refine. and as you can see in the red bar you only have 6000 or so ore but it requires almost 10000 ore to refine.

increase the ore you have the container and it will be fixed.

The way the refiner works is that the minimum crafting time is 180 seconds.
If crafting 1 batch of ore takes less that 180 seconds, it will craft multiple batches.

lets use easy numbers. (can't remember the exact numbers)

you need 100 ore per batch.
creating 1 batch takes 2 seconds.

For the refiner to finish 1 cycle.
you then need 180 / 2 x 100 = 9000 ore for 1 cycle.